Solarrific G3035 Gebrauchs- und Pflegehandbuch

Stöbern Sie online oder laden Sie Gebrauchs- und Pflegehandbuch nach Nein Solarrific G3035 herunter. Solarrific G3035 Use and Care Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Whitestone, NY 11357 email: [email protected] www.solarrific.com
Toll Free: 866-6solarr (866-676-5277) • Phone: 718-767-5165 • Fax: 718-767-5166
Solarrific, Inc.
Components:
Solar panel
Air pump
Air hose
Spring stone
Specifications:
Solar module:
Power: 1.5 Wp
Nominal voltage: 7.68 V
Nominal current: 195 mA
Safety class: IP 44
Air pump:
Operating voltage: DC 8V
Flow rate: max. 2 LPM
Max. air pressure: >450 mmHg
Safety class: IP 44
Cable length: 3 m
Hose length: 2 m
Set Includes:
Solar panel
Air pump
Air hose
Spring stone
Instructions
UPC 811594 01335 8
©2013 Solarrific, Inc.
®
SOLAR AIR PUMP KIT FOR FISH POND – G3035
Features:
• The system is designed for oxygenating the water to create a healthy environment in any
outdoor water body that keeps fish, such as outdoor aquarium, garden pond, and garden
water feature.
• The air pump is powered by a solar panel. In order to make the pump work by solar energy,
the solar panel needs to be placed in the sunlight with its solar cells facing the sun as
much as possible.
• The performance of the pump depends on the sunlight intensity and the incident angle at
which sunlight strikes the panel surface.
• There is no on or off switch available to start and stop the pump. Whenever the pump and
the solar module are connected to each other, the pump operates if there is enough
sunshine.
Assembling:
1. Roll out the air hose as well as the connection cable on the pump.
2. Fit the hose to the connector of the spring stone.
3. Connect the other end of the hose to the air outlet of the pump.
4. Place the pump on a dry and safe place near the pond. The place to hold the air pump
should be higher than the water level to prevent the water from flowing back into the pump
through the hose when the pump is not in operation.
5. Put the two pieces of the ground spike together and mount it on the back side of the solar
module with the gland nut.
6. Mount the solar module in a sunny place by the ground spike and face the solar panel
towards the sun.
7. Insert the plug of the pump to the socket of the solar module and screw the cap tightly.
Note: Don’t dip the pump in water, it is not waterproof.
Note: The pump sucks in the air from the four rectangle orifices on the bottom
shown in the right photo. Please make sure the air passage is not blocked.
Cautions:
1. Don’t expose small components, such as spring stone, to little kids since they may swallow
the small components and therefore be suffocated.
2. Please lay the connection cable properly so that it will not trip people.
3. Please mount the solar module firmly so that it will not fall down easily.
4. Do not strike the solar panel.
Cleaning The Pump
There is no need to maintenance the solar air pump regularly except the following two items:
1. Keep the surface of the solar module clean and wipe it with soft and moist cloth when
necessary.
2. Check the spring stone from time to time and replace it with a new one if the spring stone
is blocked.
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Solarrific, Inc

Whitestone, NY 11357 email: [email protected] www.solarrific.comToll Free: 866-6solarr (866-676-5277) • Phone: 718-767-5165 • Fax: 718-767-5166S

Kommentare zu diesen Handbüchern

Keine Kommentare